Flirc Raspberry Pi 3 Case
There are 1034 units left
Flirc Raspberry Pi 3 Case
The raspberry pi has taken the hobbyist community and education market by storm. A credit card sized computer with enough horse power to run any of the most popular media center packages including; XBMC, Plex, Openelec, younameit.
There couldn't have been a better companion for flirc, that's why we decided to start selling the device. Get a raspberry pi and flirc together and save some cash.
• Broadcom BCM2835 SoC
• 700 MHz ARM1176JZF-S core CPU
• Broadcom VideoCore IV GPU
• 512 MB RAM
• 2 x USB 2.0 Ports
• Video Out via Composite (PAL and NTSC), HDMI or Raw LCD (DSI)
• Audio Out via 3.5mm Jack or Audio over HDMI
• Storage: SD/MMC/SDIO
• 10/100 Ethernet (RJ45)
• Low-Level Peripherals:
• 8 x GPIO
• I2C Bus
• SPI Bus with two chip selecets
• Power Requirements: 5V @ 700 mA via MicroUSB or GPIO Header
• Supports Debian GNU/Linux Fedora, Arch Linux, RISC OS, OpenElec
Product measures - 3.50 x 1.00 x 2.50 in (Length x Width x Height)
Shipping Weight - 5.00 oz
Does the case support the Raspberry Pi 3?
Yes, it supports the Raspberry Pi 3, 2, and B+. There are a few caveats. The 3 moved the location of the LEDs and no longer has a spring loaded SD card slot.
Will I be able to overclock my Raspberry Pi?
Yes, the built in heat sink acts as a heat spreader allowing you to get more speed out of your Raspberry Pi. The 3 gets very hot, you probably don't need to overclock that puppy.
Can I see the Raspberry Pi's LEDs?
On the B+ and 2 you can. Yes, there is a tiny cutout on the front of the Raspberry Pi where the LEDs shine through. The PI 3 moved the LEDs in exchange for the antenna and are no longer visible.
Why did you make a Raspberry Pi case?
Flirc is one of the best selling items for the Raspberry Pi. We haven't only been concentrating on Flirc, we've been concentrating on enhancing media centers and their experiences. We've got more coming.
What does the case come with?
The case comes partially assembled. The top plastic piece is assembled to the aluminium housing. All you need to do is put your thermal pad on, drop your Raspberry Pi inside the case, and screw the bottom of the case on with the included.
Does the case come with a Raspberry Pi?
The case does not come with a Raspberry Pi.
Does it come with an SD or a Power Supply?
No, the case doesn't come with these, but we will be working on a very affordable kit.
Can I access the SD Card?
Yes, the SD card is accessible through a slot on the front of the case. The Pi3 no longer has a spring loaded SD card slot making it difficult to remove the card without removing the bottom of the case.
How do I attach the Thermal Pad?
No right answer here. Remove the thermal tape plastic pieces and apply to the case's heat slug. That's it. You can also apply it to the chip, either one is fine.
What kind of thermal pad is included with the case?
Included with the case are four screws and a thermal pad sized 12*12*1.4mm.
What size screws are used?
A 10mm M2.5. http://cl.flirc.io/2Z2a3g212P2b